Base light with Thelight

Secure an homogenous illumination becomes extremely simple with Thelight thanks to the great size of its luminance surface and by its capacity to open the beam while projecting the light at long distance with its Fresnel lenses.

The long throw and wide light beam of Thelight fixtures enables getting an even base light with an excellent T Stop. Thelight luminaries enable to light any object, figure, space or surface from any angle with several possibilities of light adjustment and a minimum electrical consumption.

To evenly light any kind of background Thelight recommends to hung the light fixtures from the ceiling according to the downloadable schemes based on the dimensions of the background you wish to light.

How much light do i get?

You get 900 Lux of even light over a 3 meters high room or 600 Lux over a 6 meters high room.

How does VELVET match with HD?

VELVET high power LED luminaries have been specially designed for HD use: they deliver a high colour reproduction index (more than 90 CRI) to get vibrant colours and perfect skin tones and colour rendition to avoid any problem on post production.

What are the cost savings?

Cost are dramatically reduced in terms of power draw, long LED life, maintenance free, heat free technology and cut on gels cost.
Power draw is reduced ten times over tungsten light and four times over fluorescent.
The heat free light does not disturb the actors and cuts air conditioner cost. You need just a few fixtures to get a wealthy light level due to the high light output.
The flat and portable lamp heads require minimum space on the set, transport and storage. There is no need to use corrections gels or scrims or waste time and money adjusting the light or replacing lamps.

What are real benefite of using THELIGHT?

VELVET fixtures can be remotely and DMX controlled letting you a total light control without using gels or scrims. You can digitally change light intensity, colour temperature and green/magenta bias to instantly adjust your light.

How do i place the light fixture?

To get a perfectly uniform base light Thelight recommends to hung 4LONG light fixtures from the ceiling facing down in its flat position along a row, separated 2 meters among them. You can lay out as many rows as needed separating them 2 meters each other. Set the fixtures flat at standard beam 35º angle. To get a uniform base light inside less than 4 meters high rooms hung the 4LONG light fixtures from the ceiling facing down in its flat position along a row, separated 1,5 meters among them. You can lay out as many rows as needed separating them 1,5 meters each other. Flood the fixtures at their maximum beam spread of 65º.

And what about a gradient brackground?

No problem, just spot the light fixtures, put them closer to the background and you will get the gradient you wish.